In this post, see how we made some ugly previous “repairs” look right and brought a great vintage Gibson back to life.

This 1960 Gibson Les Paul Jr. is a terrific playing and sounding specimen. But it sure didn’t come in looking this great. After the owner picked it up in an auction, he emailed us some rather scary pictures of some truly scary looking “repairs” he hoped we could correct. We assured him we could make it look great and, more importantly, play great again. When it arrived from Florida, we took some deep breaths and assessed the damage. Continue »

Here’s an early 1980’s Greco Super Real Goldtop as it arrived in our shop. Take a look at how we gave it a more authentic and vintage appearance.

The Greco Super Real is one of the more sought-after copies of the Gibson Les Paul. They consistently fetch upwards of $1500 on eBay and in our opinion, outshine many of the more common varieties. It’s got great weight, feel, and sound but the appearance is a little less convincing. The owner of this guitar noticed that it had an orange-hued finish that was clearly not the traditional nitrocellulose lacquer found on Gibson guitars. He asked us to refinish it in nitrocellulose and relic the appearance so that it looks more like a genuine vintage Les Paul.

Those original goldtops got their look from clear lacquer finish applied over bronze powder. Over time, the clear finish would wear thin and ‘check,’  exposing the bronze to arm sweat and the oxygen in the air. As a result, many of these 50+ year old guitars have taken on a greenish appearance in the more heavily worn areas. The Greco’s owner knew this and specifically wanted to see this subtle effect on his guitar – which means simulating fifty years of wear and tear in a brand new finish. You’ll see we were up to the challenge. Continue »

Can’t afford a real 1952 Telecaster? We made this new guitar feel like it was 55 years old. De Leon’s nightmare.

For a variety of reasons, some folks just prefer old guitars. Maybe it’s the neck, worn smooth by years of handling. Maybe it’s the checked and cracked finish that looks like granddad’s old tube radio. Maybe it’s just the charm of something that’s played some music in its time. Or maybe it’s the fact that vintage guitars’ values are reliably and steadily rising – making them a good investment. But some of us can’t find or afford our real dream guitar. So at Chicago Fret Works, we’ve developed a relic process that will simulate aging in a guitar, giving it the look and feel but not the pricetag of a genuine vintage piece.

Continue »

*Beware: another one of those ‘I found this vintage Les Paul in my dad’s closet’ stories follows. I like to think that if my dad had one of these in his closet I’d have found it by now.

This 1956 Les Paul Junior belongs to a friend who, yes, found this guitar in her dad’s closet. But she couldn’t play it because there’s a pretty obvious piece missing: the entire headstock! This isn’t your average reglue job. This will require building a new headstock, replacing the truss rod, and making it look as if nothing ever happened. Read on to see how. Continue »

Watch how we restore a vintage guitar that was quite literally “trashed.”

If your 1963 Polaris White Gibson SG Junior had a broken headstock, you wouldn’t throw it in the garbage would you?  Well the lucky new owner of this guitar found it sticking out of a Chicago trash can with all of its original parts! He brought it to us to repair, still amazed by his fortune.

After the head shaking and jaw dropping was finished, we got down to making this gorgeous vintage piece look and sound like nothing happened. Continue »

Sometimes braces come loose inside guitars as they grow old and dry out. When there’s a big circular soundhole to reach through, those repairs are easy enough. But in this guitar’s case, there are a pair of slender F holes and one brace that’s come completely out. The only way to get it glued back into place is to remove the entire back. Doing that to a guitar made in the early 1940’s means opening up a time capsule that hasn’t been seen by anyone since it left the factory. Continue »

Here’s a ’60s reissue Strat that Dan gave the full relic treatment to. The vintage reissues work particularly well for this kind of project because the truss rod is accessed at the body end rather than the headstock, as it was during those years. It’s one detail that would be a dead giveaway if it were wrong.

While Fender makes the truss rod true to the period, some of the other treatments these guitars receive at the factory are different from the original. So we took more authentic hardware and parts and distressed them to look like they are 45 years old. Then we completely removed the factory poly finish and applied a more authentic lacquer finish in Sonic Blue.

Continue »